Product ID:SUNPROOF HOUSE PAINT-MIDTONE BASE, 1-150
MSDS Date:06/16/1992
FSC:8010
NIIN:00N034401
MSDS Number: BPXQK

PPG INDUSTRIES INC

4325 ROSANNA DRIVE
ALLISON PARK, PA 15101
US

Emergency Phone: 412-429-5555;304-843-1300

Info Phone: 216-572-6111;800-441-9695

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

EXPOSURE TO CRYSTALLINE SILICA/QUARTZ MAY ALSO LEAD

RTECS: 9999999ZZ

ARE ASSOC W/BRTHG EXCESS AMTS OF SILICA DUST. APPLIC

RTECS: 9999999ZZ

OF RESPIRABLE SILICA/QUARTZ, SO THE POTENTIAL

RTECS: 9999999ZZ

DURING OR FOLLOWING THE USE OF THIS PROD,

RTECS: 9999999ZZ

MATERIAL SAFETY DATA SHEET INFORMATION AVIALABLE.

RTECS: 9999999ZZ

LIQUIDS IN EXCESS OF A FEW INCHES.

RTECS: 9999999ZZ

THE LOWEST SUGGESTED EXPOS LIMITS, THE LEL IN FIRE &

RTECS: 9999999ZZ

DECOMPOSITION PRODUCTS DURING WELDING OR FLAME

RTECS: 9999999ZZ

DETERMINE THE TYPE OF AIRBORNE CONTAM AGAINST

RTECS: 9999999ZZ

PHTHALIMIDE, N-((TRICHLOROMETHYL)THIO)-;

CAS: 133-07-3

RTECS: TI5685000

Fraction By Weight: 1-2%

ALUMINUM SILICATE

CAS: 1335-30-4

Fraction By Weight: 10-15%

SILICONE DIOXIDE

CAS: 68855-54-9

Fraction By Weight: 5-10%

OSHA PEL 10 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 10-15%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

NAPHTHA, MEDIUM ALIPHATIC

CAS: 64742-88-7

Fraction By Weight: 25-30%

FILM FORMERS, RESINS, AND ADDITIVES.

Fraction By Weight: 35-40%

SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 2-5%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

TERM & RPTD CNTCT. THIS PROD CNTNS TITANIUM

RTECS: 9999999ZZ

DUST IN A LONG-TERM STUDY DEVELOPED LUNG TUMORS.

RTECS: 9999999ZZ

NO INCR RISK OF CANCER FROM EXPOSURE. POTENTIAL FOR

RTECS: 9999999ZZ

LIMITED. SINCE OVEREXP ARE NOT EXPECTED, THERE IS NO

RTECS: 9999999ZZ

CRYSTALLINE SILICA/QUARTZ WHICH IARC ASSOCIATES W/AN

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INGEST:HARMFUL/FATAL IF SWALLOWED.
EYE:CAUSES IRRIT. SKIN:MAY CAUSE MOD SKIN IRRIT. INHAL:VAP & SPRAY
MIST MAY BE HARMFUL IF INHALED. VAP IRRIT EYES, NOSE & THROAT.
SANDING & GRINDING DUSTS MAY BE HAR MFUL IF INHALED. RPTD EXPOSURE
TO HIGH VAPOR CONC MAY CAUSE IRRIT OF THE RESP SYS & PERMANENT
BRAIN (EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA CRYSTALLINE (QUARTZ): GROUP 2A
(IARC)< ANTICIPATED TO BE A CARCINOGEN (NTP).
Effects of Overexposure:HLTH HAZ: & NERV SYS DMG. INTENTIONAL MISUSE BY
DELIBERATELY CONC & INHALING THE CONTENTS CAN BE HARMFUL/FATAL. EYE
WATERING, HDCH, NAUS, DIZZ, & LOSS OF COORD ARE INDICATED THAT SOLV
LEVELS ARE TOO H IGH. REDNESS, ITCHING, BURNING SENS & VISUAL
DISTURBANCES MAY INDICATE EXCESS EYE CNTCT. DRYING, CRACKING (SUPP
DATA)

First Aid:INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH W/PLENTY OF H*2O FOR @
LST 15 MIN. SKIN:FLUSH IMMED W/PLENTY OF H*2O, FOLLOWED BY
WATERLESS HAND CLEANER & SOAP & H*2O IF THE MATL APPEARS TO ADHERE
TO SKIN. INHA L:IF AFFECTED BY INHAL OF VAPOR OR SPARY MIST, REMOVE
TO FRESH AIR. APPLY ARTF RESP & OTHER SUPPORT MEASURES AS REQUIRED.
OTHER:IF INGESTED, ANY TYPE OF OVEREXP OR SYMPS OF OVEREXP OCCUR
(ING 16)

Flash Point Method:PMCC
Flash Point:115F,46C
Lower Limits:1.0%
Extinguishing Media:NFPA CLASS B EXTING (CO*2, DRY CHEM/UNIVERSAL
AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING NFPA CLASS III
COMBUST LIQ.
Fire Fighting Procedures:H*2O SPRAY MAY BE INEFTIVE. H*2O SPRAY MAY BE
USED TO COOL CLSD CNTNRS TO PVNT PRESS BUILD-UP & POSS
AUTOIGNIT/EXPLO WHEN EXPOSED TO EXTREME HEAT. (SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPARKS, & OPEN FLAMES. CLOSED CNTNRS MAY EXPLO
WHEN EXPOS TO EXTREME HEAT. DO NOT APPLY ON (SUPP DATA)

Spill Release Procedures:PROVIDE MAXIMUM VENT. ONLY PERSONNEL EQUIPPED
W/PROPER RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN THE AEA.
REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE, OR OTHER ABSORBE NT MATL & PLACE INTO CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QTYS IN BUILDING DESIGNED AND PROTECTED FOR STORAGE OF NFPA CLASS
II COMBUSTIBLE LIQUIDS.
Other Precautions:IF THIS MATL IS PART OF A MULTIPLE COMPONENT COATING
SYS, READ THE MSDS FOR THE OTHER COMPONENT(S) BEFORE BLENDING AS
THE RESULTING MIX MAY HAVE THE HAZ OF ALL OF ITS PARTS. CNTNRS
SHOULD BE GROUNDED WHEN POURING. AVOID FREE FALL OF(ING 18)

Respiratory Protection:OVEREXP TO VAPS MAY BE PVNTD BY ENSURING VENT
CTRLS, VAP EXHST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD (TC-23C) AIR
PURIFYING OR AIR SUPPLIED (TC-19C) RESP MAY ALSO REDUCE EXPOSURE.
READ RESP MFR'S INSTRUC TIONS & LITERATURE CAREFULLY TO (ING 21)
Ventilation:PROVIDE GENERAL DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP THE CONC OF INGRED LISTED IN INGRED SEC BELOW (ING 19)
Protective Gloves:NITRILE RUBBER OR NEOPRENE RUBBER.
Eye Protection:CHEMICAL WORKERS GOGGLES
Other Protective Equipment:WEAR PROTECTIVE CLOTHING, INCLUDING
IMPERMEABLE APRON.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
FIRE FIGHT PROC:IF H*2O IS USED, FOG NOZZ ARE PREFERABLE. FIRE FIGHTERS
SHLD WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP. EXPLO HAZ:HOT
SURF. TOX GASES MAY FORM WHEN PROD IS CONTACTED BY FLAME /HOT SURF.
EFTS OF OVEREXP: BURNING, REDNESS, & SWELLING ARE CNTNRS ASSOC
W/EXCESS SKIN CNTCT. CHRONIC:AVOID LONG(ING 8)

HCC:F4
Boiling Pt:B.P. Text:>280F,>138C
Vapor Pres:2.1
Vapor Density:HVR/AIR
Spec Gravity:1.18
Evaporation Rate & Reference:18 (BUOAC=100)
Solubility in Water:0.2%
Appearance and Odor:VISCOUS LIQUID W/AN ODOR CHARACTERISTIC OF THE
SOLVENTS LISTED IN ING SECTION.
Percent Volatiles by Volume:44.50

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZ DECOMP PRODS WHEN
HEATED. WELD/BRAZE/FLAME-CUTTING ON SURF COATED W/PROD MAY PRODUCE
FUMES INCL:(ING 22)

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL, AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CNTNRS SHOULD BE RECYCLED OR DISPOSED OF THROUGH
AN APPROVED WASTE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.